Showing posts with label steel. Show all posts
Showing posts with label steel. Show all posts

Saturday, November 12, 2016

Sandworm: May His passing cleanse the World

Words and Photography by Spencer J. Harding

Essay by Edward Abbey "I Loved it...I Loved it All" from Ned Judge on Vimeo.

Go to that link, watch the first few minutes of that piece by Ed Abbey. After a week of cavorting around the Moab desert I started to appreciate what ole’ Ed had to say about the desert.


But we aren’t gonna get into conservation and all the politics right now, just look at what he’s driving. That beautiful Cadillac, not some souped up jeep, a classy as hell convertible Cadillac. When trying to review this frame it has been hard to figure out what to highlight, this is the most versatile frameset for off-road riding that I am aware of at the moment.


So this is the point I want to make, you could go buy the fancy carbon fiber plus tire full squish mega bike, but if you are reading this that is probably not your thing. You are a dignified off-road cycling enthusiast, and this my friends is your Cadillac.


This is a convertible Cadillac meandering down lonely desert roads kind of bike, its about looking damn good and feeling even better. Sure there are more specific bikes, but trust me, this bike can be made to handle almost everything (Captain Ahab was a little gnarly rigid but I managed). You don’t need to ride in the desert for long to be stoked that you have some plus sized tires, and you can run just about any tire you can image on this thing (26/27.5/29).


The chain stays are longer than bike publications would deem noteworthy (fear not this thing wheelies no problem) but, this thing is a freaking Cadillac, its not gonna turn on a dime, but you don't need to when you look and feel this good.


So get that stem up nice and high and put some wide bars so you can really take in the landscape, you don’t have to watch every rock and sand patch with this beauty, just let the 3”+ air suspension handle the imperfections. I’ve yet to see anyone ride this bike without a shit eating grin on their face the entire time.


Are the type of person who; likes to get way way out in the great outdoors, enjoys the challenge of crawling through spreadsheets of mountain bike parts measurements, rides slower than the average Strava roadie who just discovered mountain biking, has an appreciation for fashion over function, and wants to build up a plus bike that is so classy that even ole’ Ed Abbey would tip his hat?


Then my friend, the Sandworm is for you. THE SPICE MUST FLOW.

Saturday, October 8, 2016

Rehabbing a Classic Peugeot 26" Montreal Express

We're in the business of making frames, so it's not surprising that we focus a lot of attention on creating new things. But that doesn't mean that we don't appreciate well made bikes from the past too. Pedal Revolution in San Francisco refurbishes donated bikes as part of their mission to provides skills and opportunities for young people in the the community. While these bikes appear far more humble than most of what you'll seen on bike blogs and tradeshow floors, they offer a rare chance to improve and restore a bike that has proven it's self worthy of a second life on the streets of the city.


Built in Canada from Japanese Ishiwata steel, this bicycle represents another era of mountain bike design, perhaps closer to today's trekking and adventure touring models. The frame is lugged chromoly, while the fork is a TIG welded unicrown design. Both sets of dropouts feature rack and fender mounting eyelets, and the Shimano Deore V-Brakes we've installed offer plenty of clearance for the Soma New Xpress 26 x 1.75" tires.


We removed the original single wall 6 speed wheels and replaced them with a modern double wall 8 speed set. These will offer more reliability and an expanded gear range thanks to a 34 tooth cassette.


Another significant modification was replacing both the bars and the quill stem. This frame is much longer than it is tall, and would be difficult to fit with the original steel riser bars. We chose the locally designed Sycip Wonder Bars for their generous back sweep and their reasonable price. Paired with a Soma Fab Sutro quill stem we've elevated the cockpit to a more upright, commuter friendly position. These bars should play nicely with a front basket or cargo rack since they'll offer a fair bit 'o leverage.


In addition to the Shimano V-Brake levers we also installed a pair of IRD Power Ratchet friction thumb shifters. The original Shimano levers worked fine in friction mode, but were beginning to crack around the plastic casing so we opted to replace them. The IRD levers feature modified Rivendell Silver levers which work flawlessly paired with almost any drivetrain. The Sutro stem features our favorite SF landmark, which can be spotted from most parts of the city.


The original rear derailleur was not badly worn, but had been neglected and was covered in years of grime. A full disassembly, cleaning and lubrication brought it back to life and kept the Peugeot's retro aesthetic intact.


The wide range Sakae square taper triple cranks won't turn any collectors heads, but look fantastic and offer a much better range of gears for tackling the bay area's many climbs. As with the rear derailleur these too required a considerable amount of cleaning to restore their classic looks.


The original shop sticker marks this bikes south bay pedigree.


If you've got a classic ride that you've been dreaming about bringing back to life, or if you've got one bike too many and you want to donate it to support Pedal Rev's Youth Internship program you can call or email The Shop or better yet, stop by and say what's up.


Up next, we'll be rebuilding this New Albion Homebrew frame with a custom blend of components from the Pedal Rev collection. Stay tuned for more on that.

Tuesday, May 24, 2016

Rando Gnar

I've always been a fan of Nitto Japan. Back when track bikes were still cool I always had a couple pairs of Nitto bars in rotation. There's just somthing about the feel of a steel bar that just doesn't compare to anything else. They feel solid, yet compliant. They don't transmit vibrations like aluminum, and won't snap and skewer you in a million places like carbon.


Earlier this year when we were meeting with Akira-san (the boss at Nitto) in Taipei, I asked if they could make a mountain bike version of their famous Grand Randonneur touring drops. You may recall we like these bars so much we named our 650b touring frame after them.


They have a classic French-style bend, with flared drops and slightly raised ramps. They work great for brevets and loaded touring, due to their multiple hand positions and conservative drop. I've ridden the alloy bars for years, but sometimes I get a little bit too rowdy and I wanted somthing that would hold up to "Manny Ride" scenarios.


So the wizards at Nitto did their thing, and came back with a couple samples made from the same tubing as their unflappable track bars. I'm in love. They feel amazing. The hood position is perfect, the drops are comfy, and they look a treat.


We're going to get a batch of these made up, but they're going to take a while to arrive. So if you're interested in a pair shoot us a line and we put your name on the list. That way if we know we're going to sell out we can get more in the queue so people don't have to wait 6 months if they miss the first run.

Monday, April 18, 2016

Eroica California


It was the Tuesday before Eroica and we hadn't made any plans for how we would get ourselves and our bikes down to the central coast near San Luis Obispo. Our pals at American Cyclery were heading down, but didn't have a booth or anything to show at the expo. We knew it would be a great event. After all, L'eroica only comes to the USA once a year.


Long story short, we rented a van and made it to Paso Robles fashionably late on Friday morning. Several cups of coffee and multiple croissants later our booth was unpacked and we got a chance to walk around the festival a bit.


There were plenty of lust worthy bikes on display, many sporting Soma tires and Nuovo Retro cage plates, as the demanding course the previous year led riders to reconsider their period correct freewheels and sew up tubulars.


Even though the forecast promised scattered showers there were still a fair number of people at the pre-ride show. We ran into several bay area friends from Citizen Chain, Re-fried Cycles out of SF and Stone's Cycles from Alameda.


Of course there was a healthy representation of Italian pride, with many classic Bianchis, Masis, De Rosas and Colnagos on display.


Bianchi also had new bikes including the Eroica signature model, which featured reproduction Dia Compe Shifters, centerpull brakes and Non-Aero drop levers. Even the official bike opted to spec lower gearing to give riders an edge on some of the steeper gravel climbs heading up over the coastal mountains.


Local cycling institution Wally's Bicycle Works was there with almost a full shops worth of classic bikes, apparel and components.


At the center of the event were smaller dealer tables filled will all sorts of swap meet parts and collectibles.


There were also plenty of modern classics about, including this limited edition Soma Triplecross brought by Rivet Cycle Works to showcase their leather touring saddles.



To comply with Eroica California's traditional aesthetic requirements many riders needed to "upgrade" their cockpit with some vintage levers from Mafac, Modolo or Campagnolo. Luckily American Cyclery had an ample supply for riders who failed to plan ahead.


"Is that a Californian or Milano?"


We showed off some Suntour XCD direct mount chainrings for TA, Stronglight and other 50.4mm crank arms.


Here's a beautiful custom randonneur from Fitz Cyclez sporting the full Sun 3 bolt crankset.


In classic swap meet style we brought lots of unique accessories and components for the hardcore bike nerds to paw over.


Eroica is one of the few places where "obsolete" aero bottles get more attention than carbon dream machines. We couldn't feel more at home here.


Maximizing pneumatic suspension was the ultimate hack for riders sticking to traditional single pivot calipers. "Will this clear my fork crown?"



Enigmatic bicycle personalities abound bearing obscure cycling treasures and paraphernalia.


The Soma x AC booth happened to be immediately adjacent to the British Bicycle Co, who were displaying many traditional cycling products from the British Isles. These new Harris Tweed bags got us eagerly fingering the merchandise.


The Pashley Clubman is a newish drop bar offering from the venerable English manufacturer. Like the Bianchi Eroica, it also features Dia Compe centerpull calipers, and traditionally styled components all around. We would love to see how these look with a set of cream-colored Soma New Xpress tires!


Norma from the California Bicycle Coalition came along to help us man the booth and to spread the word about their work to bring bicycle friendly streets to communities across the Golden State. There is only ONE WAY.


Despite the vintage theme of the event we did bring along one or two of our complete Soma builds from the AC showroom. This Grand Randonneur is Eroica ready right out of the box (once the Aero brake levers are swapped out).


While the majority of riders used newer derailleur mechanisms, some earlier bikes still sported fixed wheel drive trains, like this beautifully preserved skip tooth chain.


The gold anodized Modolo levers make a fun addition to the mostly silver components on this vintage Singer. (You had better pronounce that right or let me tell you you're going to get an earful.)




As a fan of center-pull brakes I certainly got plenty of opportunities to admire the many iterations of this beautiful Mafac design from several generations and manufactures.


While last years event had a more typical Californian forecast, the dreary start and occasional drizzle gave the event a more temperate feel which allowed riders to pedal comfortably even in warmer wool attire.


Taliah Lempert, an artist well known for making gorgeous bicycle themed art, had a booth set up with many vintage bicycle prints and apparel for sale.


Panaracer skinwall tires like the Soma New Xpress proved a good option for balancing the need for offroad performance with traditional style.


Since Eroica California isn't really a race many riders preferred to wear old school hair nets and caps rather than modern racing headgear.


While the tourists oh'd and ah'd over the flashier Masi's, the true connoisseurs were checking out this rare Oscar Egg from AC's historic bicycle collection. For those not up on California cycling history Oscar Juner was a famous racer from the east coast who later opened American Cyclery on Stanyan street in San Francisco. He epitomized the term "retro grouch" before it was retro. His "Oscar Juner Trophy" still remains in American Cyclery's original store to this day, bearings the names of many up and coming young riders including the only American Tour winner, Reno Nevada's Greg Lemond.


As the riders embarked early Sunday morning the roads were still damp from light rain the night before, and overcast skies compelled us to step up the pace as we road to the first feed stop. The "No wine before nine" rule was not strictly enforced.


The access roads that wind around Paso Roble's famous vineyards gave us our first taste of dirt to come.


Everybody who rode at the first Eroica California last year eagerly awaited the excellent olive oil frites at Olea Farm. We lingered as long as possible, soaking up the delicious home made tomato sauce.


After the first couple stops our group had thinned out as the hammers pulled away and the slackers stuffed their jersey pockets with bananas and tangerines.


Kiler Canyon was the first real test to see who could stay up on their corn cob gearing and who would accept defeat.


As the day wore on and the temperature rose we cruised over the rolling hills and gravel back roads. Occasionally other riders would jump on our wheels and our group would grow for a while until somebody fell off the back or sped up to catch the next group ahead.


Every feed stop presented new opportunities to check out fellow riders bikes and chat about what parts we had chosen for the ride. Mike rode his father's custom Merz touring bike, and even got to ride along with Jim Merz himself for a while.



Bradley, the current owner of American Cyclery, rode his California made replica Breaking Away Masi, built up with period correct Campy parts, Soma Supple Vitesse 28c tires and IRD Defiant 46/30 double cranks. Orange really is the fastest color.


We joked about our customizations, claiming that mechanical doping was a real epidemic on this year's ride.


Looking back from the top of Kiler Canyon we could see dark clouds on the horizon. We knew we would have to pick up the pace if we wanted to arrive back in town before the rain.













Lunch was provided by a classic California style "roach coach". Riders who chose tacos were rewarded with a quick turn around and a flight of local wines to taste. Those that opted for burgers lost some time, but everybody left the old barn feeling satisfied.




We took a break along the final stretch to check out our bikes and review safety protocol. Our triumphant return was met with bottles of the local Olive Oil for those that got all the stamps to complete their route cards.


After the festivities wound down we packed up the van and headed over the mountains to Cambria.




The beach was covered with piles of driftwood and roots which people had used to build ephemeral structures.


Even for native Californians the coast holds a special allure.




The Pigeon Point Hostel is a real jewel. If you've never ridden down the coast you have to make this part of the itinerary. Call ahead to make sure they have rooms or bunks available.

Waking up to the crashing surf on the rocks below the lighthouse reminds us that there is more to life than push notifications and social media metrics.



On our way through Pescadero we stopped for coffee at a little spot that wan't there the last time I came through town.


This excellent old Bridgestone caught my eye because you don't see rod brakes much in the states. Apart from being a bit weather worn, this bike had all the accessories.


A fully enclosed chain case, double leg kickstand and skirt guard!



Inside we found lots of reading material and an eclectic mix of vintage records, cloths and Americana.


















When we made it up to Halfmoon bay we had to stop at Cameron's Pub, a chaotic mishmash of British sundries and memorabilia.




Walkers shortbread biscuits are a staple of English bicycle touring. Just add Nutella and you'll be good for miles.




The smoking bus is open for patrons to enjoy a puff safe from the ocean's disdain.



It's not clear how this bus made it's way from it's birthplace in southern England, but it seems a safe bet that it's travels have ended here in California.


Safe and sound back in the city that mostly sleeps, we return again to our real lives. But at night as we lay awake listening to cars speeding along the freeway, we remember a time not so long ago, when heroic cyclists ruled the road and battled for glory, and perhaps a bottle of fine wine at the end of the ride.